SEDEM-Temperatura

Manuel Martínez +34 93 289 71 40 mmartinez@sedemsa.es

Expert solutions in manufacturing temperature primary elements.

SEDEM designs and manufactures normalized primary elements for temperature measurement, thermocouples built in all natures of wires and resistance thermometers with any different type of sensor element, in compliance with the respective standards of manufacture of industrial temperature sensors DIN EN 60584 or ANSI ISA-MC96.1 and IEC 60751.

We also manufacture ATEX executions to operate in explosive atmospheres certified by the Laboratorio Oficial Madariaga (LOM) and different types of protection, including the CE-Mark.

SEDEM maintains a stock of raw, components and semi-finished materials to achieve agile delivery service and tailored to the needs of each customer.

Our product managers will offer you the best solution. Contact us.

SEDEM has a catalog of normalized temperature probes: thermocouples according to DIN EN 60584 / ANSI ISA-MC96.1 and resistance thermometers according to IEC 60751. In this catalog you can identify the product code suitable to your application.

Our quality management system according to ISO 9001: 2015 establishes controls to be carried out during manufacture and final product to ensure compliance with the requirements.

The customer can request tests, calibrations and certificates according to related manufacturing standards. Examples:

  • Dielectric test ASTM D 149
  • Electrical isolation test ASTM E 780, E 235, E 644
  • Radiographic examination (X-rays) ASTM E 94, E 142

Contact SEDEM for more information.

SEDEM will study your project from design, in collaboration with your technical office, if you wish, offering a technical-economical solution tailored to your need. We have experience in all markets and sectors:

  • Energy
  • Oil & Gas
  • Chemical
  • Pharmacy
  • Cement
  • Other sectors
  • OEMs

In section downloads/questionnaires you will find the data sheet of temperature elements, a guide that will help you specify the data required to study your specific application.

We have an extensive list of references of the most representative projects carried out in the most important industry sectors in Spain and also abroad.

Contact SEDEM for more information.

SEDEM manufactures thermowells and protection sheaths with flanged, threaded and welded process connection. Manufactured from solid bar or seamless pipe. For high temperature applications are used ceramics with different degree of porosity depending on the application.

Applications with high loads of speed, pressure and temperature:

  • Materials: carbon steels, stainless steels and alloys AISI 316L, F-11, F-22, refractory steels, titanium, Hastelloy, Monel, Inconel, ceramic, Teflon, glass, etc.
  • Tests applicable: radiographic test and dye penetrant inspection of welding, hydrostatic pressure test, etc.

Contact SEDEM for more information.

SEDEMs Engineering Department can tackle any instrumentation project of primary elements for temperature measurement meeting the highest standards and requirements.

SEDEM has extensive experience in providing temperature sensors for major multinational Oil & Gas sector, particularly in the production and processing of crude and storage, regasification and distribution processes of LNG.

In Spain we collaborate with leading companies in power generation as power plants, combined cycle plants, wind turbines, thermosolar plants, waste energy recovery, etc...

Our experience extends to temperature measurement applications in power plants such as:

  • Water and steam lines 
  • Preheaters
  • Boiler tubes
  • Turbine performance 
  • Chimney gases 
  • Wind turbine 
  • Energy recovery with oils

We have an extensive list of references of the most representative projects carried out in the most important industry sectors in Spain and also abroad.

Contact SEDEM for more information.

SEDEMs Engineering Department can tackle any instrumentation project of primary elements for temperature measurement meeting the highest standards and requirements.

SEDEM has extensive experience in providing temperature sensors for major multinational pharmaceutical, chemical and food industries, particularly in:

  • Process reactors 
  • Furnaces incineration of disposable gases 
  • Temperature control in clean rooms
  • Autoclaves 
  • Pilot plants 
  • Pure water supply lines
  • Chambers of food drying
  • Cooking ovens
  • Cleaning lines, etc..

We have an extensive list of references of the most representative projects carried out in the most important industry sectors in Spain and also abroad.

Contact SEDEM for more information.

SEDEMs Engineering Department can tackle any instrumentation project of primary elements for temperature measurement meeting the highest standards and requirements.

SEDEM has extensive experience in providing temperature sensors for manufacturers of equipments and machines, particularly:

  •  Electro-medical
  •  Electro-aesthetic and wellness
  •  Autoclaves
  •  Dosing of machinery oil
  •  Coffee roasting machines
  • Deep-freezing and ovens

We have an extensive list of references of the most representative projects carried out in the most important industry sectors in Spain and also abroad.

Contact SEDEM for more information.

SEDEMs Engineering Department can tackle any instrumentation project of primary elements for temperature measurement meeting the highest standards and requirements.

SEDEM has extensive experience in providing temperature sensors for heat treatment of tempering, hardening carburizing and nitriding salt baths.

For applications in aggressive atmospheres, our temperature probes are manufactured, among other qualities, in Inconel-600 and AISI-446:

  • Blast furnaces
  • Chimney flues
  • Exhausted gases in steam boilers
  • Continuous section furnaces
  • Forging

We have an extensive list of references of the most representative projects carried out in the most important industry sectors in Spain and also abroad.

Contact SEDEM for more information.

The temperature probes manufactured by SEDEM can incorporate signal transmitters with output 4-20 mA, HART and PROFIBUS and multiple features. Our distributor INOR Process AB pioneered the manufacture of this type of equipments mounted inside the electrical connection head of the temperature probes.

Our extensive catalog also incorporates a large variety of cables for applications in corrosive environments, high and cryogenic temperatures, compensation and extension cables for thermocouple and connecting elements of probes to process or machines.

Contact SEDEM for more information.